How to switch off output logs relating style sheet?

When I run my application, I have many extra logs in Qt Creator "Application Output" tab:
[qss_ld] "loading style sheet file \"titlebardockinactive.qsse\"."
[qss_ld] "style sheet file resolved in the default path: \":/styles/blacktheme/titlebardockinactive.qsse\"."
[qss_ld] "processing style sheet file \":/styles/blacktheme/titlebardockinactive.qsse\"."
[qss_ld] "importing style sheet file \"variable.qsse\"."



How can I switch off this output logs?

Read More

IIS Reverse Proxy Rewrite Module is gibing 404 service not found error

I have a service which i want to rewrite the masked url is :

https://my_domain_name:my_port_no/uri_part. /> It is working when i request it through iis server directly.
But when i rewrite this using reverse proxy and set up an inbound rule only
then it is showing service not found 404 error in postman. Here's the rewritten url which i want to hit



http://iis_server_ip:iis_server_port/uri. />

I have choosen rever proxy for url rewrite and and created an inbound rule wherein i have put the masked url. I am fairly new to iis and its application. Can anyone tell me what could be the issue.


I tried requesting through rewritten url and it was showing 404 service not found error.
I am able to connect to the domain from my iis server as telnet is working. Also using actual url i am able to get the response but when i rewrite and then request it is showing 404 service not found error. Also i am not sure if i should implement an outboun rule as well or not in reverse proxy.

Read More

compare two array and exclude the common one and show the result

my first array contains line of strings(this list contains 456454), which needs to be compared with an array(456454, 456789).


$unprotected - "this list contains 456454" $blocklist - @('456454', '456789')


foreach ($ele in $blocklist)
{
foreach ($elem in $unprotected)
{
if ($ele -contains $elem)
{}
else {$var_chk = "1"}
}
} if($var_chk = "1"){$Arr_lst += $elem}

Read More

When does a kafka connect SourceTask fail?

I am looking into emitting metrics when a SourceTask fails for specific reasons only, my current understanding is that whenever start or poll encounters an unhandled exception source task enters failed state.


This got me curious about the lifecycle of a SourceTask.


is my understanding correct? can it fail for reasons when poll doesn't throw any error?


also would every instance of "entering into failed state" trigger the stop method within the SourceTask or can it happen that stop isn't triggered?

Read More

How to replace unicode characters in string with something else python?

I have a string that I got from reading a HTML webpage with bullets that have a symbol like "•" because of the bulleted list. Note that the text is an HTML source from a webpage using Python 2.7's urllib2.read(webaddress).



I know the unicode character for the bullet character as U+2022, but how do I actually replace that unicode character with something else?



I tried doing
str.replace("•", "something")



but it does not appear to work... how do I do this?

Read More

What is causing my connection to my sql server not to connect?

My bartering app that reads from a sql server database freezes at connection_1.open .[[[[enter image description here](
https://i.stack.imgur.com/oPKGp.png)](https://i.stack.imgur.com/1xvaS.png)](https://i.stack.imgur.com/h3Izl.png)](https://i.stack.imgur.com/tvPNA.png) />

I was expecting the connection to go through.


What causes the above error?


Please help

Read More

Reset 3 Slicers to Select All when in a 4th slicer 'Yes' or 'No' selected

I'm pretty new to PBi and seem to have an opportunity that I can't find a solution for.
I have 4 slicers for 4 flags (a Yes or No value) to display whether a patient has Condition 1, Condition 2 etc. As these 4 conditions aren't mutally exclusive, a patient could have 2 or more conditions, how can I reset 3 slicers to Select All when a 'Yes' or 'No' is selected in a 4th slicer?

Read More

Is there a online FTP i can put on my website?

Im trying to find something so that i can modify, delete etc my code on the web. Do y'all have any good ones you recommend? Im trying to find it because i have a co-dev that cant access my server for some reason.


I tried googel/youtube searching it but found nothing

Read More

Problem with saving data to a file, the file is left blank most of the time **EDIT i dont really understand, im relatively new to this [duplicate]

I have made a program which is trying to save data to a file however when i try to save it it doesnt go into the file the way i expected it to.
from tkinter import *
from tkinter import messagebox

addPupil = Tk()
addPupil.geometry("275x200")
addPupil.title("Add Pupil")

Label(text = "Add New Pupil", width = 30).grid(columnspan = 3)

x = 1
y = 0

entryboxNames = ["First Name", "Last Name", "School Name", "Guardian Name", "Gender"]

for i in range(5):
Label(text = entryboxNames[i]).grid(row = x, column = y)
ent = Entry()
Entry().grid(row = x, column = y + 1)
x = x + 1

def save():
file = open("details.txt", "a")
file.write(entryboxNames[i] + ":" + ent.get() + " " + "\n\n")
messagebox.showinfo("Saved", "Data saved")
file.close

save = Button(text = "Save", command = save).grid(row = 6, column = 0)



for some reason this code isnt saving data to the file, all i can see is the final term (gender) with nothing after it even if anyone enters something

Read More

Login for access token 422 Validation Error FastApi

I want make autorization on my site using this code (It is not important for me to use this particular authorization option. If you have other options for implementing authorization on the site, I will be glad to consider them)
def get_db():
db = SessionLocal()
try:
yield db
finally:
db.close()

SECRET_KEY = "somekeyfasfascsacs"
ALGORITHM = "HS256"

bcrypt_context = CryptContext(schemes=["bcrypt"], deprecated="auto")

oauth2_bearer = OAuth2PasswordBearer(tokenUrl="auth/token")

db_dependency = Annotated[Session, Depends(get_db)]

def authenticate_user(username: str, password: str, db: db_dependency):
user = db.query(Users).filter(Users.username == username).first()
if not user:
return False
if not bcrypt_context.verify(password, user.hashed_password):
return False
print(type(user))
return user

def create_access_token(username: str, user_id: int,
expires_delta: Optional[datetime.timedelta] = None):

encode = {"sub": username, "id": user_id}
if expires_delta:
expire = datetime.datetime.utcnow() + expires_delta
else:
expire = datetime.datetime.utcnow() + datetime.timedelta(minutes=15)
encode.update({"exp": expire})
return jwt.encode(encode, SECRET_KEY, algorithm=ALGORITHM)

async def get_current_user(token: Annotated[str, Depends(oauth2_bearer)]):
try:
payload = jwt.decode(token, SECRET_KEY, algorithms=[ALGORITHM])
username: str = payload.get("sub")
user_id: int = payload.get("id")
user_role: str = payload.get("role")
if username is None or user_id is None:
raise HTTPException(status_code=status.HTTP_401_UNAUTHORIZED, detail="Could not validate user")
return {"username": username, "id": user_id, "user_role": user_role}
except JWTError:
# When authorizing using a button and trying to use other functions,
# it gives this error
raise HTTPException(status_code=status.HTTP_401_UNAUTHORIZED, detail="Could not validate user")

@router.post("/token")
async def login_for_access_token(response: Response, form_data: OAuth2PasswordRequestForm = Depends(),
db: Session = Depends(get_db)):

user = authenticate_user(form_data.username, form_data.password, db)
if not user:
return False
token_expires = datetime.timedelta(minutes=60)
token = create_access_token(user.username,
user.id,
expires_delta=token_expires)

response.set_cookie(key="access_token", value=token, httponly=True)

return True



But I get this error:





If you log in through the Autorize button, it doesn’t give you an error, but when you try to use other functions, the site gives you a 401 Unautorize error.

Read More

Access a Json inside a string?

Suppose I have a single dictionary/Json in Python which is inside a List:


Minimum Working Example:
response = [{ "UserStor": "id1","StoryTitle": "title1","StoryState": "state1", "UserStoryType": "type1","RawUpdates": "updates1","RawComments": "comments1"}]



If I need to access this dictionary, I can do:
print(response[0])

#output
{'UserStor': 'id1', 'StoryTitle': 'title1', 'StoryState': 'state1', 'UserStoryType': 'type1', 'RawUpdates': 'updates1', 'RawComments': 'comments1'}


---



Now, I have another dictionary but, it is inside a string
response = "{'UserStor': 'id1', 'StoryTitle': 'title1', 'StoryState': 'state1', 'UserStoryType': 'type1', 'RawUpdates': 'updates1', 'RawComments': 'comments1'}"



How, can I access this dictionary?


I know I can use ast.literal_eval().


Is there any other way to access this dictionary without using literal_eval()/eval() ?


I am here to learn, your comments and answers are welcome.

Read More

Add tag to another tag that matched condition

In this case, i just want to add just before , but i don't want to add that already has before . What to to add or edit from the below Regex?
$string = "One two three four five six seven";
Result i want : One two three four five six seven

$xx = preg_replace_callback(
'//',
function ($addtag) {
return "".$addtag[0];
},
$string
);

echo $xx;



Result i want : One two three four five six seven

Read More

No module named - Running script from Terminal/IronPython [duplicate]

When I try to open a scrpit using IronPython, I get an error: No module named 'config'


File structure for python project:



Root



ConfigGenerator



__config_generator.py







config.py




__config_generator.py:
import config

CONFIG = config.Config()

def __main():
# there are redundant to the question code

if __name__ == '__main__':
__main()



And now C# project:
using Microsoft.Scripting.Hosting;
using IronPython.Hosting;
using System;
using System.Windows.Forms;

namespace ProjectName
{
public partial class MainForm : Form
{
private ScriptEngine _engine;

public MainForm()
{
_engine = Python.CreateEngine();

InitializeComponent();
}

private void StartConfigGenerator_Click(object sender, EventArgs e)
{
RunScript(@"Q:\Project\Python\Bots\Root\ConfigGenerator\__config_generator.py");
}

private void RunScript(string path)
{
_engine.ExecuteFile(path);
}
}
}

Read More

Java SWT: Difference between redraw, reskin, update and requestLayout (and pack)

Can anybody please explain to me the difference of the methods Control.redraw(), Control.update(), Widget.reskin(), Control.requestLayout() and Control.pack()?
Unfortunately the API documentation does not tell so much about the differences.


I guess the following:


Control.requestLayout() means calculating the size and position of a control inside a Composite when its content (like a text in a label or text field) has changed and perhaps its displayed size/position is not anymore appropriate.
I think I understand Control.pack(): It is just a part of Control.requestLayout or rather Composite.layout() as only the size of controls will be changed but not the position.


Control.redraw() and Control.update(): It seems to me that both methods just paint the control again and you call them when the operating system does not show it correctly anymore. You call the methods if size and position have not changed. The difference between both methods is that update() repaints the control immediately whereas redraw() can do it after some time.


I don't understand when I need to call Widget.reskin(). It seems to me the same as Control.redraw().

Read More

Optimization dots&line game

i just built dots and line game with minimax algorithm where user could play with AI, but unfortunately it is too slow even in just depth 4. so any optimization technique?


here My code,
class Maze {
constructor(gridX, gridY, sideSize) {
this.board = Array.from({ length: gridY }, (a) => a = Array.from({ length: gridX }, (b) => b = Array.from({ length: 4 }, c => c = 0)));
this.visited = [];
this.gap = Math.floor(sideSize / 8);
this.x = gridX;
this.y = gridY;
this.winPointX = 0;
this.winPointY = 0;
this.row = gridX * this.gap;
this.column = gridY * this.gap;
this.sideSize = sideSize;

};
drawGrid(ctx) {
console.log(this.row, this.column)
ctx.clearRect(0, 0, canv.width, canv.height);
for (let x = 0; x < this.row; x += this.x)
for (let y = 0; y < this.column; y += this.y) {

ctx.fillStyle = 'red';
ctx.fillRect(x * this.gap, y * this.gap, this.gap, this.gap);

}

};
ai(depth, alpha, beta, player, advantage, y, x, tile_Y, tile_X) {
if (y !== undefined && x !== undefined) {
let winPoint = this.boxForm(y, x)
if (tile_X > -1 && tile_X < 8 && tile_Y > -1 && tile_Y < 8) {
winPoint = winPoint || this.boxForm(tile_Y, tile_X)
}

if (winPoint && player == 'O') {
player = 'X';

advantage += 10

}
else if (winPoint && player == 'X') {
player = 'O';

advantage -= 10;

// console.log('Human bonus',y,x)
}
}

if (depth === 0) {

return { score: advantage }
}

var pieceArr = [];

for (var i = 0; i < this.board.length; i++) {
for (var j = 0; j < this.board[0].length; j++) {

for (let b = 0; b < 4; b++) {
if (this.board[i][j][b]) {
continue;
};
let tileX = j;
let tileY = i;
let best = {}
this.change(i, j, b)
best.bestmove = [i, j, b];
let neghdir;
if (b == 2) {
neghdir = 0;
tileX++
} else if (b == 0) {
neghdir = 2;
tileX--
} else if (b == 3) {
neghdir = 1;
tileY--
} else {
neghdir = 3;
tileY++
};
if (tileX > -1 && tileX < 8 && tileY > -1 && tileY < 8) {
this.change(tileY, tileX, neghdir);
}
var g = this.ai(depth - 1, alpha, beta, player == 'X' ? 'O' : 'X', advantage, i, j, tileY, tileX);

/* if (tileX>-1&&tileX-1&&tileY alpha) {
alpha = best.score;
}
} else {

if (best.score < beta) {
beta = best.score
}
};
if (tileX > -1 && tileX < 8 && tileY > -1 && tileY < 8) {
this.board[tileY][tileX][neghdir] = 0;
}
this.board[i][j][b] = 0;
pieceArr.push(best)

if (alpha >= beta) {
break;

}

}

}
};
pieceArr.sort((a,b)=>{
return Math.random()-0.5;
})
var bestMove;
if (player === 'X') {
var bestScore = -10000;
for (var i = 0; i < pieceArr.length; i++) {
if (pieceArr[i].score > bestScore) {
bestScore = pieceArr[i].score;
bestMove = i;
}
}
} else {
var bestScore = 10000;
for (var i = 0; i < pieceArr.length; i++) {
if (pieceArr[i].score < bestScore) {
bestScore = pieceArr[i].score;
bestMove = i;
}
}
}
return pieceArr[bestMove];
};
rmSide(side, dir, col) {
let vertex;
if (dir == 'w') {
vertex = [side[0] * this.x, this.y * side[1]];
} else if (dir == 'e') {
vertex = [(side[0] + 1) * this.x, this.y * side[1]];
}
else if (dir == 'n') {
vertex = [this.x * side[1], (side[0]) * this.y];

} else if (dir == 's') {
vertex = [this.x * (side[1] + 1), (side[0]) * this.y];
}
if (!vertex) {
return null
}

let x = vertex[0];

for (let y = vertex[1] + 1; y < vertex[1] + this.y; y++) {

ctx.fillStyle = col;
if (dir == 'n' || dir == 's') {
ctx.fillRect((y) * this.gap, (x) * this.gap, this.gap, this.gap);
} else {
ctx.fillRect((x) * this.gap, (y) * this.gap, this.gap, this.gap);
}

};

}
change(y, x, dir, player) {

this.board[y][x][dir] = 'X';

}
boxForm(y, x) {

for (let i = 0; i < 4; i++) {
if (!this.board[y][x][i]) {
return false
}

};

return true
}
};
//dots and line
const canv = document.getElementById('canv');
const ctx = canv.getContext('2d');
const size = Math.min(window.innerWidth, window.innerHeight) * 0.7;
canv.width = size;
canv.height = size
const sideSize = size / 8;
console.log(sideSize)
let turn = 'X'

const maze = new Maze(8, 8, sideSize);

maze.drawGrid(ctx);
function mve(tileX, tileY, dir, player) {

if (tileX < 8 && tileY > -1 && tileX > -1 && tileY < 8) {

turn = player == 'O' ? 'X' : 'O'

let n = null;
if (dir == 'n') {
n = 3
} else if (dir == 's') {
n = 1
} else if (dir === 'e') {
n = 2
} else {
n = 0
}

/*
let cordX = e.clientX;
let cordY = e.clientY;
let dirCor = {
'n':[65+tileX*(100+20),75+(tileY)*(100+20)],
's':[65+tileX*(100+20),195+(tileY)*(100+20)],
'w':[45+tileX*(100+20),90+(tileY)*(100+20)],
'e':[165+tileX*(100+20),90+(tileY)*(100+20)]

};
console.log(cordX,cordY,dirCor);

// console.log(dirCor['n'][0]&&(dirCor['n'][0]+100)&&dirCor['n'][1]&&(dirCor['n'][0]+15))
if (cordX>=dirCor['n'][0]&&cordX=dirCor['n'][1]&&cordY=dirCor['s'][0]&&cordX=dirCor['s'][1]&&cordY=dirCor['e'][0]&&cordX=dirCor['e'][1]&&cordY=dirCor['w'][0]&&cordX=dirCor['w'][1]&&cordY -1 && tileX < 8 && tileY > -1 && tileY < 8) {
maze.change(tileY, tileX, neghdir);
if (maze.boxForm(tileY, tileX)) {
turn = player;
}
};
if (turn == "O") {
console.log(maze.board)
playAI()
}

}

}
}

function playAI() {

let aimove = maze.ai(4, -Infinity, Infinity, 'X', 0);
let dir1 = undefined;
if (aimove.bestmove[2] == 0) {
dir1 = 'w'
} else if (aimove.bestmove[2] == 1) {
dir1 = 's'
} else if (aimove.bestmove[2] == 2) {
dir1 = 'e'
} else {
dir1 = 'n'
};
console.log(aimove)
mve(aimove.bestmove[1], aimove.bestmove[0], dir1, 'O')

}

canv.addEventListener('click', (e) => {
const rect = canv.getBoundingClientRect()
let tileX = Math.floor((e.clientX - rect.x) / sideSize);
let tileY = Math.floor((e.clientY - rect.y) / sideSize);
let dir = prompt('direction');

mve(tileX, tileY, dir, 'X');

});

Read More

npm install MaxListenersExceededWarning

During npm install I get several of the following warning message:


(node:5156) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxLis
teners() to increase limit
(node:5156) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 close listeners added to [TLSSocket]. Use emitter.setMaxLis
teners() to increase limit
npm ERR! code ECONNRESET
npm ERR! syscall read
npm ERR! errno ECONNRESET
npm ERR! network request to
https://registry.npmjs.org/yocto-queue/-/yocto-queue-0.1.0.tgz failed, reason: read ECONNRESET
npm ERR! network This is a problem related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network settings.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly. See: 'npm help config'


npm ERR! A complete log of this run can be found in: C:\Users\xxxx\AppData\Local\npm-cache_logs\2023-11-10T15_52_29_865Z-debug-0.log


install npm and dependences

Read More

Atomic locks in Laravel (demo & tutorial)

submitted by /u/aarondf
[link] [comments]

Read More

How to pass multiple values as sql array for a parameter? (Or how can I cirumvent limit of parameters of prepared statement?)

I'm trying to create a query using QueryDSL wich accepts more than 32767 parameters (32767 is the upper limit of parameters the postgresql driver accepts).


The query is currently created like this:
static final QInvoiceEntity invoiceEntity = ...

void queryInvoicesWithId(String... ids) {
JPAQuery query = ...
query.where(invoiceEntity.id.in(ids));
}



This works if no more than 32767 parameters are passed. If you pass more than that (e.g. 38000) the following exception is thrown:
Caused by: java.io.IOException: Tried to send an out-of-range integer as a 2-byte value: 38000
at org.postgresql.core.PGStream.sendInteger2(PGStream.java:275)



One solution according to 1 is to use ANY and pass the parameters as an array. I've tried the following but to no avail:
query.where(Expressions.booleanTemplate("{0} = ANY {1}", invoiceEntity.id, ids);



But this throws the following exception:
org.hibernate.hql.internal.ast.QuerySyntaxException: unexpected token: ? near line 3, column 31 [select invoiceEntity
from InvoiceEntity invoiceEntity
where invoiceEntity.id = ANY (?1)



I've even tried to pass the parameters as a string and convert it back in the query:
query.where(Expressions.booleanTemplate("{0} = ANY string_to_array({1}, ',')", invoiceEntity.id, String.join(",", ids));



But this throws the following exception:
org.hibernate.hql.internal.ast.QuerySyntaxException: unexpected token: ( near line 3, column 45 [select invoiceEntity
from InvoiceEntity invoiceEntity
where invoiceEntity.id = ANY string_to_array(?1, ',')

Read More

How to get the cell's output data from a azure databricks notebook to a file

Unable to get a single cell's output to a file in Azure databricks notebook


Tried many ways but unable to get the result.


Can someone help me on this if there is a way or there is no way please let me know.


Thanks and regards,
Prem

Read More

Getting an image from the database using path images on the client side

I used multer to download the image and save the path of the image to the database, and then how can I get the image from the client and show it on the screen?
import multer from 'multer';

const storageConfig = multer.diskStorage({
destination: (req, file, cb) => {
cb(null, './images')
},

filename: (req, file, cb) => {
cb(null, Date.now() + '-' + file.originalname)
}
})

const upload = multer({storage: storageConfig});

let path = '';

app.post('/upload',upload.single('image'), (req, res) => {
res.setHeader('Access-Control-Allow-Origin', '
http://localhost:3000'); /> if(req.file) {
console.log(req.file);
path = req.file.path;
res.send('hi')
return;
}
res.send('bye')
})



after I received the file path I saved it in the database, but I don’t know how to use it later to show this picture on the screen

Read More

The Ultimate "git nah" Alias

---



Recently, developer Liam Hammett shared a fabulous git nah snippet on Twitter that is better than your existing git nah alias 🔥



I know lots of people use a "nah" alias to abort their current changes, but they usually limit it to "git reset --hard".


I like to do more by cleaning and aborting any potential rebase. If I use the "nah" command, I know I want a fresh start, so this helps



He shared two versions, including setting it up as a git alias:
# Git alias ⬇️
[alias]
nah = "!f(){ git reset --hard; git clean -df; if [ -d ".git/rebase-apply" ] || [ -d ".git/rebase-merge" ]; then git rebase --abort; fi; }; f"



If you prefer a bash function instead, here's that version that you would add to your .bashrc or .zshrch file:
# Bash function ⬇️
nah () {
git reset --hard
git clean -df
if [ -d ".git/rebase-apply" ] || [ -d ".git/rebase-merge" ]; then
git rebase --abort
fi
}



Depending on which snippet you prefer, here's how you'd run it:
# Alias
$ git nah

# Bash
$ nah



What are some of your favorite git aliases? Share them with us!



The post The Ultimate "git nah" Alias appeared first on Laravel News.


Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Read More

Laravel Nova gets a fresh new website

---



Laravel Nova is a beautifully-designed administration panel for Laravel. Carefully crafted by the creators of Laravel, and they just launched a brand new website with a fresh design.



Nova allows you to create beautiful, easy-to-use, and complete application backends that handle all of your needs.


Gone are the days of cobbling together lackluster administration panels. Nova is designed and crafted by the Laravel team, so it integrates perfectly with the framework.


Nova is the easiest way to quickly manage your data, view your key application metrics, or handle any custom process your application requires.


To celebrate the new launch, all Nova licenses are discounted by ~30%. You can even renew your existing license early to lock in the 30% discount. Visit nova.laravel.com for all the details.



The post Laravel Nova gets a fresh new website appeared first on Laravel News.


Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Read More

How to prevent GitHub Actions from being run based on name of the branch merging into other branch

I have the following workflow:
on:
pull_request:
branches: [main]



I only want GitHub Actions to run when the branch I'm making the PR from does not start with "random/name*".


I found this in the docs:
on:
pull_request:
# Sequence of patterns matched against refs/heads
branches-ignore:
- 'mona/octocat'
- 'releases/**-alpha'



but it only excludes it when making a PR to that branch, I want it to ignore branches I'm making the PR from. Is this possible?

Read More

How to prevent dialog from disappearing? Reactjs

In this code I am displaying popup that have buttons, when button responsible for cancelation is clicked confirmation dialog shows up. I want the popup to disappear when clicked outside of it so I handle it like so:
const popupRef = useRef(null);

const handleClickOutside = (event: MouseEvent) => {
if (
popupRef.current &&
!popupRef.current.contains(event.target as Node)
) {
onClose();
}
};

useEffect(() => {
document.addEventListener('mousedown', handleClickOutside);

return () => {
document.removeEventListener('mousedown', handleClickOutside);
};
}, []);



onClose is callback that closes the popup. Now when button is clicked I create the dialog like so:
{showCancelConfirmationDialog &&
}

const handleCloseDialog = () => {
console.log("closing");
setShowCancelConfirmationDialog(false);
}

const handleCancelReservation = () => {
console.log("block")
block.isReserved = false;
block.reservedBy = "notMe";
onClose();
}



Dialog code:
interface DeleteConfirmationDialogProps {
onCancel: () => void;
onConfirm: () => void;
name: string;
}

const DeleteConfirmationDialog: React.FC = ({ onCancel, onConfirm, name }) => {
return (



Te jazdy są zarezerwowane przez: {name}


Czy na pewno chcesz je przesunąć i powiadomić o tym kursanta?
Usuń i powiadom
Anuluj

);
}

export default DeleteConfirmationDialog;



And now the problem is that wherever I click everything disappears because useEffect and handleClickOutside is triggered no matter what and I have no idea what it is happening. If I comment out this code it works fine. I tried adding another popupRef for the dialog but it didn't work. I also tried to control it via boolean when dialog is active but it also does not work.

Read More

Using route group in NextJS 13 stops tailwind from working

In my NextJS 13 app, Tailwind classes stop being applied when I move page.tsx/layout.tsx from the root of my app directory into a (main) directory (also in the root of my app directory). I imagine there is some config somewhere that is becoming invalidated when I use the route group, but I'm not sure what it is.


This is my tailwind.config file:
import type { Config } from 'tailwindcss'

const config: Config = {
content: [
'./src/pages/**/*.{js,ts,jsx,tsx,mdx}',
'./src/components/**/*.{js,ts,jsx,tsx,mdx}',
'./src/app/**/*.{js,ts,jsx,tsx,mdx}',
],
theme: {
extend: {
backgroundImage: {
'gradient-radial': 'radial-gradient(var(--tw-gradient-stops))',
'gradient-conic':
'conic-gradient(from 180deg at 50% 50%, var(--tw-gradient-stops))',
},
},
},
plugins: [],
}
export default config

Read More

Laravel Pail - The easiest way to tail your log files

---



Laravel Pail is a package that allows you to easily dive in and tail your application's log files. Pail is designed to work with any log driver, be super easy to remember, and provide a set of useful filters to help you quickly find what you're looking for.





Installing Laravel Pail




Installation is as easy as requiring the package from Composer:
composer require laravel/pail



Then start it to begin tailing your logs:
php artisan pail



Laravel Pail has some flags that allow you to filter log messages in useful ways:


Filter logs by exception type


php artisan pail --filter="QueryException"



Filter by message


php artisan pail --message="User created"



Filter by Log level


php artisan pail --level=error



You can use any of the levels: emergency, alert, critical, error, warning, notice, info, and debug.


Filter by User ID


php artisan pail --user=1



The source code is available on GitHub at laravel/pail, and you can view the full documentation on the Laravel site.



The post Laravel Pail - The easiest way to tail your log files appeared first on Laravel News.


Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Read More

Laravel 10.31 Released

---



This week, the Laravel team released v10.31, the ability to place batches within job chains. You can run jobs sequentially, then parallelize a batch of jobs, and continue with the chain once that batch has been completed.


Allow placing a batch on a chain




Sebastien Armand added the ability to run batches of jobs within a job chain



This is a use case we encounter in a couple places at Square where we have a serial process of jobs that need to be handled and one or more of the steps either should be worked on in parallel or are of unknown length when initially triggering the workflow and will create additional jobs, but we need to know when this is finished to ensure we keep the chain going.



Here's an example from the updated Chains & Batches documentation, where you could first flush the cache, release a batch of podcasts, and then batch notifications of those podcasts:
use App\Jobs\FlushPodcastCache;
use App\Jobs\ReleasePodcast;
use App\Jobs\SendPodcastReleaseNotification;
use Illuminate\Support\Facades\Bus;
 
Bus::chain([
new FlushPodcastCache,
Bus::batch([
new ReleasePodcast(1),
new ReleasePodcast(2),
]),
Bus::batch([
new SendPodcastReleaseNotification(1),
new SendPodcastReleaseNotification(2),
]),
])->then(function () {
// ...
})->dispatch();




Sleep::until() handles string timestamps




James Hulse contributed the ability to pass a timestamp string to Sleep::until(), which will still ensure the value is numeric:
Sleep::until("1699411804");



Added support for Sec-Purpose header




@nanos contributed support for the Sec-Purpose header when relying on the $request->prefetch() method:



Whilst most User Agents set Purpose: prefetch in prefetch requests, Firefox uses Sec-Purpose: prefetch in the latest version, as described in the above MDN article. This means that calling the ->prefetch() method on the request will return false for requests sent via the Firefox browser, regardless of prefetch status.



Release notes




You can see the complete list of new features and updates below and the diff between 10.30.0 and 10.31.0 on GitHub. The following release notes are directly from the changelog:


v10.31.0






* [10.x] Allow Sleep::until() to be passed a timestamp as a string by @jameshulse in
https://github.com/laravel/framework/pull/48883 />

* [10.x] Fix whereHasMorph() with nullable morphs by @MarkKremer in
https://github.com/laravel/framework/pull/48903 />

* [10.x] Handle class_parents returning false in class_uses_recursive by @RoflCopter24 in
https://github.com/laravel/framework/pull/48902 />

* [10.x] Enable default retrieval of all fragments in fragments() and fragmentsIf() methods by @tabuna in
https://github.com/laravel/framework/pull/48894 />

* [10.x] Allow placing a batch on a chain by @khepin in
https://github.com/laravel/framework/pull/48633 />

* [10.x] Dispatch 'connection failed' event in async http client request by @gdebrauwer in
https://github.com/laravel/framework/pull/48900 />

* authenticate method refactored to use null coalescing operator by @miladev95 in
https://github.com/laravel/framework/pull/48917 />

* [10.x] Add support for Sec-Purpose header by @nanos in
https://github.com/laravel/framework/pull/48925 />

* [10.x] Allow setting retain_visibility config option on Flysystem filesystems by @jnoordsij in
https://github.com/laravel/framework/pull/48935 />

* [10.x] Escape forward slashes when exploding wildcard rules by @matt-farrugia in
https://github.com/laravel/framework/pull/48936 />






The post Laravel 10.31 Released appeared first on Laravel News.


Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Read More

SwiftUI / Xcode: ForEach closed range vs half open range - error with Text function. Why the difference?

I have an old pascal and C background, and recently started to learn Swift.
I have encountered an error beyond my common sense.


Following code works fine.


click to view
ForEach(0..

Read More

I do not understand why PostgreSQL indicates that a procedure does not exist

I have a strange problem with PostgreSQL. It indicates that a procedure does not exist while I think that I created it. I really do not understand. I tried to remove arguments only to see if I would have the same problem or another one but I still got the same problem...


Here is my code :
DROP TABLE IF EXISTS clients, accounts, transactions, failed_transactions CASCADE;

CREATE TABLE IF NOT EXISTS clients
(
id int PRIMARY KEY,
name varchar
);

CREATE TABLE IF NOT EXISTS accounts
(
id int PRIMARY KEY,
balance float,
client int,
FOREIGN KEY (client) REFERENCES clients(id),
CHECK (balance >= -500)
);

CREATE TABLE IF NOT EXISTS transactions
(
id serial PRIMARY KEY,
amount float
);

CREATE TABLE failed_transactions
(
id serial,
account_id integer,
attempted_amount float,
timestamp timestamp DEFAULT NOW()
);

CREATE OR REPLACE PROCEDURE log_failed_transaction(new_line record, old_line record)
LANGUAGE plpgsql
AS $$
BEGIN
IF new_line.balance

Read More

I can't get new data after apolo fetchMore

next.js,typescript,react,apollo.

I want to use fetchMore when handleLoadMore is called to get 10 data from the 11th one, but the data in console.log(data) is from 0 to 10, which is the first data I got.

I tried to open the DevTool network, but the network shows data from 11.
import {
Box,
Button,
} from '@chakra-ui/react'
import Image from 'next/image'
import { useRouter } from 'next/router'
import { useState } from 'react'

import { ChannelLayout } from '@/components/Layouts/ChannelLayout'
import { useFindMyMoviesQuery } from '@/generated/request'
import type { NextPageWithLayout } from '@/types/layout'

const Cannel: NextPageWithLayout = () => {
const router = useRouter()

const { data, loading, fetchMore } = useFindMyMoviesQuery({
variables: { skip: 0, take: 10 },
})

const [currentPage, setCurrentPage] = useState(1)
console.log(data)
if (loading) return loading...

const handleLoadMore = () => {
const pageSize = 10
fetchMore({
variables: {
skip: 11,
take: 10,
},
}).then((result) => {
setCurrentPage(page)
})
}
return (



)
}

Cannel.getLayout = ChannelLayout

export default Cannel



As noted above.

Read More