Update from 9 to 10

Should I update from laravel 9 to 10? It's a small project. submitted by /u/icex34
[link] [comments]

Read More

Cashier package and Blade files

I'm a little confused about this Cashier package.

I installed it using the Laravel website (with composer), but noticed there's no template files. composer require laravel/cashier php artisan vendor:publish --tag="cashier-migrations"

Then i stumbled across this github repo:
https://github.com/laravel/cashier-stripe

The repo has a some template files so now I'm not sure what to use. Anybody knows more about this?Can I just copy the few blade files from the repo? Ot is this a whole other package?

Thanks!

​ submitted by /u/kimk2
[link] [comments]

Read More

Unable to install pyocd in latest version of Anaconda

I'm trying to set up our usual Anaconda development environment on a new Windows 10 PC. I downloaded the latest version of Anaconda last week (version 2023.09, I believe), and I'm having trouble installing pyocd. pyocd installed easily on all the other PCs several months ago.


I ran conda using Anaconda Powershell Prompt in administrator mode. Here's what conda returns:
(base) PS C:\WINDOWS\system32> conda install -c conda-forge pyocd
>> Collecting package metadata (current_repodata.json): done
Solving environment: unsuccessful initial attempt using frozen solve. Retrying with flexible solve.
Solving environment: unsuccessful attempt using repodata from current_repodata.json, retrying with next repodata source.
Collecting package metadata (repodata.json): done
Solving environment: unsuccessful initial attempt using frozen solve. Retrying with flexible solve.
Solving environment: \

Found conflicts! Looking for incompatible packages.

This can take several minutes. Press CTRL-C to abort. failed /

UnsatisfiableError: The following specifications were found to be incompatible with each other:

Output in format: Requested package -> Available versions



The error messages are pretty unhelpful - I'd try installing downrev packages, but I don't know which ones to downgrade. Any ideas what's going on?


UPDATE
I updated conda, and now it actually gives me actionable error messages:
(base) PS C:\WINDOWS\system32> conda install -c conda-forge pyocd
>> Channels:
- conda-forge
- defaults
- anaconda Platform: win-64
Collecting package metadata (repodata.json): done
Solving environment: | warning libmamba Added empty dependency for problem type SOLVER_RULE_UPDATE failed

LibMambaUnsatisfiableError: Encountered problems while solving:
- package pyocd-0.34.0-pyhd8ed1ab_0 requires cmsis-pack-manager >=0.4.0,=0.4.0,=3.10,=3.7,=3.8,=3.9,

Read More

Restriction of explicit object parameter in lambda with capture

In C++23, lambda-expression supports an explicit object parameter (a.k.a. "Deducing this"). I found strange restriction for lambda with capturing at [expr.prim.lambda]/p5.



Given a lambda with a lambda-capture, the type of the explicit object parameter, if any, of the lambda's function call operator (possibly instantiated from a function call operator template) shall be either:



* the closure type,

* a class type derived from the closure type, or

* a reference to a possibly cv-qualified such type.






[Example 2:
struct C {
template
C(T);
};

void func(int i) {
int x = [=](this auto&&) { return i; }(); // OK
int y = [=](this C) { return i; }(); // error
int z = [](this C) { return 42; }(); // OK
}



-- end example]



Question: Why is there such restriction for lambda with capture only? Are there any implementation issues?

Read More

Bash script to find and return files in directory

I am a non-programmer experimenting more than anything by writing a commandline based system to write a blog.


I have the following as part of a longer script:

# Find & list out files
filefind (){
files=( */*.md )
PS3="$MSG" ;
select file in "${files[@]}"; do
if [[ $REPLY == "0" ]]; then echo 'Bye!' >&2 ; exit
elif [[ -z $file ]]; then echo 'Invalid choice, try again' >&2
else break
fi
done ;}



I would like to echo " No Files found. Enter 0 to exit" if the folder is empty. I realise I would need another elif line to do this.


When I run this, as is, I always get a return of:
{ ~/Code/newblog } $ ./blog pp
1) /.md
Choose file to Publish, or 0 to exit:



Ideally I'd like only the message with exit option, but would also like to understand why the /.md is returned. Apologies if this is answered elsewhere, hard to know what to look for if you don't know what to look for..! Happy to be pointed in the right direction.

Read More

Error in GiftedChat, Warning : Maximum update depth exceeded. in react-native-gifted-chat

i want to use react-native-gifted-chat
and then when I try to call it, it keeps getting this error
Warning: Maximum update depth exceeded. This can happen when a component calls setState inside useEffect, but useEffect either doesn't have a dependency array, or one of the dependencies changes on every render.
in GiftedChat (created by Chat)
in Chat (created by SceneView)
in StaticContainer
in EnsureSingleNavigator (created by SceneView)
in SceneView (created by CardContainer)
in RCTView (created by View)
in View (created by CardContainer)
in RCTView (created by View)
in View (created by CardContainer)
in RCTView (created by View)
in View
in CardSheet (created by Card)
in RCTView (created by View)
...



And my code
import React from "react";
import { GiftedChat } from 'react-native-gifted-chat';

export default function Chat(){
return(



)
}



How can I solve this issue?

Read More

Deploy angular app to static web app on azure

i have a angular application that i want to be deployed on azure static web apps via git hub actions.
On my local machine:
angular cli 17
node 20
npm 10



This is the yaml file.

name: Azure Static Web Apps CI/CD

on:
push:
branches:
- master
pull_request:
types: [opened, synchronize, reopened, closed]
branches:
- master

jobs:
build_and_deploy_job:
if: github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.action != 'closed')
runs-on: ubuntu-latest
name: Build and Deploy Job
steps:
- uses: actions/setup-node@v4
with:
node-version: '18'
- uses: actions/checkout@v4
with:
sub-modules: true
- name: Build And Deploy
id: builddeploy
uses: Azure/static-web-apps-deploy@v1
with:
azure_static_web_apps_api_token: ${{ secrets.AZURE_STATIC_WEB_APPS_API_TOKEN_VICTORIOUS_DESERT_030B8CE03 }}
repo_token: ${{ secrets.GITHUB_TOKEN }} # Used for Github integrations (i.e. PR comments)
action: "upload"
###### Repository/Build Configurations - These values can be configured to match your app requirements. ######
# For more information regarding Static Web App workflow configurations, please visit:
https://aka.ms/swaworkflowconfig /> app_location: "/" # App source code path
api_location: "api" # Api source code path - optional
output_location: "dist/sun-club" # Built app content directory - optional
###### End of Repository/Build Configurations ######

close_pull_request_job:
if: github.event_name == 'pull_request' && github.event.action == 'closed'
runs-on: ubuntu-latest
name: Close Pull Request Job
steps:
- name: Close Pull Request
id: closepullrequest
uses: Azure/static-web-apps-deploy@v1
with:
azure_static_web_apps_api_token: ${{ secrets.AZURE_STATIC_WEB_APPS_API_TOKEN_VICTORIOUS_DESERT_030B8CE03 }}
action: "close"




I am stuck with this error.



Node.js version v16.20.2 detected.
The Angular CLI requires a minimum Node.js version of v18.13.



I have tried to update the node version with a command from the yaml file but it seems that node 16 is default.


I tried to update the node version using nvm but no success.

Read More

Is nova profitable?

I have been studying tools like Nova, tinkerwell and their licencing. I am myself working on a tool targeted for Laravel and Symfony app, and exploring the licencing model.

I am thinking of licencing the tool as these apps do. But I am not quite sure, if thats the right way to go.

Anyone experienced in different business models for these kind of tool? Why is nova not opensource? Are there any opensource tools in laravel ecosystem that have sustained a business?

I would love to hear the business aspect of the tools by the creators of nova and tinkerwell, or point me to the direction where I can get more info. submitted by /u/broncha
[link] [comments]

Read More

An introduction to Eloquent’s internals

submitted by /u/lyotox
[link] [comments]

Read More

Hard to find a job

Is it just me or the PHP / Laravel job market is down at the moment? I love Laravel but I feel "forced" to migrate to a different ecosystem / tech stack where I can find a decent job.

Looking forward to your thoughts. submitted by /u/Rude-Professor1538
[link] [comments]

Read More

Threejs: Pointlight not lighting up my geometries

I'm trying to create a scene from a set of triangles using Threejs. To get the shape of all the triangles i used a BufferGeometry which seems to create the shape correctly. However, it does not respond to lighting. I have tried with several different materials including standard, phong and lambert. With on luck. I understood that one might need to compute normals to the mesh, so i tried adding computeVertexNormals to the code as well but no luck. Ive also tried using flatshading, but that did not seem to have any effect either.


I then figured it might be the geometry and not the material that was throwing me of, so I tried adding a spinning torus to my scence using phong material, but it does not get iluminated either.


The code I have so far is this:
import * as THREE from 'three';
import {OrbitControls} from 'three/addons/controls/OrbitControls.js';

const canvas = document.querySelector('#c')
const scene = new THREE.Scene();
const camera = new THREE.PerspectiveCamera(75, window.innerWidth / window.innerHeight, 0.1, 1000000);
const renderer = new THREE.WebGLRenderer({antialias: true,castShadow:true, canvas});
const controls = new OrbitControls(camera, canvas)

renderer.setSize(window.innerWidth, window.innerHeight);
document.body.appendChild(renderer.domElement)

const topoGeometry = new THREE.BufferGeometry();
// Fetching triangles from static file
await fetch('
http://{localserver}/topography.json') /> .then((response) => response.json())
.then((json) => {
const vertices = new Float32Array(json.geometry.vertices.map((coord) => {
return [coord[0], coord[1], coord[2]]
}).flat())
const indices = json.geometry.triangles.flat()
topoGeometry.setIndex( indices )
topoGeometry.setAttribute('position', new THREE.BufferAttribute(vertices, 3))
topoGeometry.computeVertexNormals()
});
const topoMaterial = new THREE.MeshStandardMaterial({
wireframe: false,
color: 0x00ff00,
});
const topo = new THREE.Mesh( topoGeometry, topoMaterial )
scene.add(topo)

camera.position.z = 2000;
camera.position.x = 0;
camera.position.y = 0;

const torusGeometry = new THREE.TorusGeometry(50,50)
const torusMaterial = new THREE.MeshPhongMaterial()
const torus = new THREE.Mesh(boxGeometry, boxMaterial)
torus.position.setZ(400)
scene.add(torus)

//Adding pointlight to scene
const light = new THREE.PointLight( 0xffffff, 1, 1000 );
light.position.set( 0, 0, 600 );
light.castShadow = true;
scene.add( light );

const lighthelper = new THREE.PointLightHelper(light,30, 0xffffff)
const gridHelper = new THREE.GridHelper(3000,50)
gridHelper.rotateX(Math.PI / 2)
scene.add(lighthelper, gridHelper)

function animate(){
requestAnimationFrame(animate)
camera.updateProjectionMatrix()
controls.update(0.01)
box.rotateX(0.01)
box.rotateY(0.01)
renderer.render(scene, camera)
}
animate()



Heres a small gif from the resulting scene:

Read More

Decrypt parameter store secrets conditionally?

I am trying to create a policy to allow users to view all the parameter store values unless it is encrypted by the dev kms key. The following is the policy that i've written.
{
"Version": "2012-10-17",
"Statement": [
{
"Sid": "DenyDecryptForDevKey",
"Effect": "Deny",
"Action": "kms:Decrypt",
"Resource": "*",
"Condition": {
"StringEquals": {
"kms:RequestAlias": "dev"
}
}
},
{
"Sid": "AllowDecryptIfNotDevKey",
"Effect": "Allow",
"Action": "kms:Decrypt",
"Resource": "*",
"Condition": {
"StringNotEquals": {
"kms:RequestAlias": "dev"
}
}
},
{
"Sid": "GetSSMParameters",
"Effect": "Allow",
"Action": [
"ssm:GetParameter",
"ssm:GetParameters",
"ssm:GetParametersByPath"
],
"Resource": "*"
}
]



}


but when i'm trying to create it in the UI, these are the following permissions it shows that are defined in the policy.
| Explicit deny (1 of 402 services) |
|------------------------------------|
| Service | Access level | Resource | Request condition |
|--------------|--------------|----------------|---------------------------|
| KMS | Limited: Write | All resources | kms:RequestAlias = dev |

| Allow (1 of 402 services) |
|-----------------------------------|
| Service | Access level | Resource | Request condition |
|------------------|--------------|----------------|-------------------|
| KMS | Limited: Write | All resources | kms:RequestAlias !== dev |
| Systems Manager | Limited: Read | All resources | None |



This is how i am testing it :



* Create a parameter with type SecureString and encrypt it with key dev

* Create another parameter with type SecureString and encrypt it with key that is not dev.

* Create a Role. testing-role with Trusted entity type as AWS account.

* Create an IAM policy with the above permissions and attach to the role.

* Switch role from the UI inputting the name of the role i.e. testing-role that i created as well as the AWS account ID.

* After switching to the role, go to the parameters that were created and try to view the value by toggling Show decrypted value






But somehow I'm still able to decrypt any secrets encrypted by dev key. Thank you.

Read More

Vue3 :style backgroundImage not working with require

I'm trying to migrate a Vue 2 project to Vue 3. In Vue 2 I used v-bind style as follow:




In Vue 3 this doesn't work... I tried also:
:style="{ backgroundImage: `url(${require('@/assets/imgs/' + project.img)})` }"



Still not working.


It seems like require doesn't work for Vue 3, that's why I tried without it, but then I see the background-image url path in the Inspector, but the image is not there.


Can somebody help with that? Thanks!

Read More

Docker config for postgress and pgadmin fails

I have the next yml file:
version: '3.5'

services:
db:
image: postgres
restart: always
environment:
- POSTGRES_PASSWORD=postgres
container_name: postgres
volumes:
- ./pgdata:/var/lib/postgresql/data
ports:
- '5432:5432'

pgadmin:
image: dpage/pgadmin4
restart: always
container_name: nest-pgadmin4
environment:
- PGADMIN_DEFAULT_EMAIL=admin@admin.com
- PGADMIN_DEFAULT_PASSWORD=pgadmin4
ports:
- '5050:80'
depends_on:
- db




When i do docker compose up i expect to run both images, but i get both continously restarting in Docker app. When i also open
http://localhost:5050/, the tab is not opeing.
Did someone faced the same issue?
Note: i use Windows and try to run the dosker file in context of nest js application.

Read More

FrankenPHP v1.0 is Here

---



FrankenPHP just hit a significant milestone this week, reaching a v1.0 release. A modern PHP application server written in Go, FrankenPHP gives you a production-grade PHP server with just one command.


It includes native support for Symphony, Laravel, WordPress, and more:



* Production-grade PHP server, powered by Caddy

* Easy deploy - package your PHP apps as a standalone, self-executable binary

* Run only one service - no more separate PHP-FPM and Nginx processes

* Extensible - compatible with PHP 8.2+, most PHP extensions, and all Caddy modules

* Worker mode - boot your application once and keep it in memory

* Real-time events sent to the browser as a JavaScript event

* Zstandard and Gzip compression

* Structured logging


* Monitor Caddy with built-in Prometheus metrics

* Native support for HTTPS, HTTP/2 and HTTP/3

* Automatic HTTPS certificates and renewals

* Graceful release - deploy your apps with zero downtime


* Support for Early Hints






Is there support for FrakenPHP in Laravel Octane?
Not yet, but there is an active pull request to Add support for FrankenPHP to Laravel Octane.


Which PHP modules are supported?
I tried looking for a definitive list, but from what I gather most popular PHP extensions should work. The documentation confirms that OPcache and Debug are natively supported by FrankenPHP.


You can get started with FrankenPHP at frankenphp.dev, and browse the documentaion to learn about the worker mode, Docker images, and creating static binaries of your application.


If you want to experiment with your application, the easiest way to try it out is to run the following Docker command:
docker run -v $PWD:/app/public \
-p 80:80 -p 443:443 \
dunglas/frankenphp



For Laravel, you'll need to run the following Docker command (the FrankenPHP Laravel docs have complete setup instructions):
docker run -p 443:443 -v $PWD:/app dunglas/frankenphp



You can also run the frankenphp binary in macOS and Linux if you'd rather not use Docker.



The post FrankenPHP v1.0 is Here appeared first on Laravel News.


Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Read More

Creating a custom Laravel Pulse card

submitted by /u/aarondf
[link] [comments]

Read More

Is your github actions build currently failing on your Laravel project? Solution inside.

Early yesterday (Dec 6th, 2023) our github actions build started randomly failing due to Psr fatal errors. It appears php-psr was added to the widely used setup-php action.

Add , :php-psr to your extension list to resolve the issue.

Hoping this saves you some headache! submitted by /u/selfpaidinc
[link] [comments]

Read More

How to handle authorization for changes on specific model properties?

Simple example: Book model has a price property. It can only be updated by user with permission "can-update-book-price". Is there something better than adding a PATCH endpoint that is protected by the permission and not including the property in the fillable of the model, so it can't be overridden by the PUT update endpoint when the whole object is sent? How to handle updates from Nova then? submitted by /u/iShouldBeCodingAtm
[link] [comments]

Read More

Up-to-date methods of using Vue with Laravel in a non-SPA way?

So, I'm going to be starting my own project and since I've been working with Laravel for the past 5 years, it's the obvious choice. I've also been enjoying working with Vue alongside Laravel and have built a few smaller SPA apps a while ago. For the past few years I've been working on a non-SPA project with Laravel and Vue+Vuetify. Its setup is rather complicated with a component loader and what not.

I've been out of the loop on new developments so I thought I would ask here. What's the current best way to set up a non-SPA Laravel and Vue project?

The project will basically do backend auth, routing etc. but Vue should be used to render the front-end. I might use something for state management on more complex views but in general, that would be it. I don't need front-end routing.

I've been looking at the TALL stack but then again, I'm already familiar and quite fond of Vue, so I would rather stick to it. submitted by /u/fidanym
[link] [comments]

Read More

Using 1Password Service Accounts to inject secrets into a Laravel project

submitted by /u/jpcaparas
[link] [comments]

Read More

I've been loving Benchmarking lately, but the Framework does this one quirky thing with the first result of a set. Specifically, the first return is always unusually high.

Lately, I've been spending time A/B benchmarking code against refactored versions assuming that both pieces of code pass their respective tests. One thing that always leaves me scratching my head is the way the first returned value of the Benchmark helper is always way higher than all other values. At first, I thought that this was due to some startup overhead in the framework, but I'm not so sure. Here's a test for you to try along with the result I got.

Here's the long-way-around code I played with for experimentation (each line is exactly the same):

php [ Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1] ];

Here's the result:

php [ 36.802083, 1.678583, 1.420791, 1.051042, 1.019792, 1.0015, 1.018708, 1.423625, 1.227666, 1.0715, 1.065666, 1.032791, 0.9855, 1.095708, 1.460583, 1.113666, ]

Weird right?

Here's another quirky example:

php $a = [ Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1] ]; $b = [ Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1], Benchmark::value(fn() => User::factory()->create())[1] ]; [$a,$b];

Result:

php [ [ 30.447542, 1.143333, 1.172375, 1.166459, 1.20575, 1.402584, 1.189042, ], [ 1.45775, 1.071958, 1.050291, 2.011417, 1.458583, 1.110292, 4.568708, ], ]

Methinks there be a ghost in the machine. submitted by /u/MuadDibMelange
[link] [comments]

Read More

Azure APIM API is not visible in Logic Apps

I created a consumption-based Logic App and are trying to call an API from API Management Service (Consumption Tier).
However, the OpenAPI I imported from a swagger file in APIM doesn't show up in Logic Apps.


I don't understand what I missed here.


APIM
Logic Apps Issue


I followed the same steps from this tutorial:

https://www.youtube.com/watch?v=FsF9m4-sYwg&t=2109s

Read More

Terminate istio sidecar istio-proxy for a kubernetes job / cronjob

We recently started using istio Istio to establish a service-mesh within out Kubernetes landscape.



We now have the problem that jobs and cronjobs do not terminate and keep running forever if we inject the istio istio-proxy sidecar container into them. The istio-proxy should be injected though to establish proper mTLS connections to the services the job needs to talk to and comply with our security regulations.



I also noticed the open issues within Istio (istio/issues/6324) and kubernetes (kubernetes/issues/25908), but both do not seem to provide a valid solution anytime soon.



At first a pre-stop hook seemed suitable to solve this issue, but there is some confusion about this conecpt itself: kubernetes/issues/55807

lifecycle:
preStop:
exec:
command:
...




Bottomline: Those hooks will not be executed if the the container successfully completed.



There are also some relatively new projects on GitHub trying to solve this with a dedicated controller (which I think is the most preferrable approach), but to our team they do not feel mature enough to put them right away into production:




* k8s-controller-sidecars

* K8S-job-sidecar-terminator







In the meantime, we ourselves ended up with the following workaround that execs into the sidecar and sends a SIGTERM signal, but only if the main container finished successfully:

apiVersion: v1
kind: ServiceAccount
metadata:
name: terminate-sidecar-example-service-account
---
kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: terminate-sidecar-example-role
rules:
- apiGroups: [""]
resources: ["pods"]
verbs: ["get","delete"]
- apiGroups: [""]
resources: ["pods/exec"]
verbs: ["create"]
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: terminate-sidecar-example-rolebinding
subjects:
- kind: ServiceAccount
name: terminate-sidecar-example-service-account
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: Role
name: terminate-sidecar-example-role
---
apiVersion: batch/v1beta1
kind: CronJob
metadata:
name: terminate-sidecar-example-cronjob
labels:
app: terminate-sidecar-example
spec:
schedule: "30 2 * * *"
jobTemplate:
metadata:
labels:
app: terminate-sidecar-example
spec:
template:
metadata:
labels:
app: terminate-sidecar-example
annotations:
sidecar.istio.io/inject: "true"
spec:
serviceAccountName: terminate-sidecar-example-service-account
containers:
- name: ****
image: ****
command:
- "/bin/ash"
- "-c"
args:
- node index.js && kubectl exec -n ${POD_NAMESPACE} ${POD_NAME} -c istio-proxy -- bash -c "sleep 5 && /bin/kill -s TERM 1 &"
env:
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace




So, the ultimate question to all of you is: Do you know of any better workaround, solution, controller, ... that would be less hacky / more suitable to terminate the istio-proxy container once the main container finished its work?

Read More

Laravel 10.35 Released

---



The Laravel team released v10.35 with a Blade @use directive, a number abbreviation helper, the ability to generate a secret with artisan down, and more. Here is a bit more info about the new features introduced this week:


Add a Blade @use() directive




Simon Hamp contributed a @use() directive to import a PHP class into a Blade template without using raw PHP tags:
{{-- Before --}}
@php
use \App\Enums\WidgetStatusEnum as Status;
@endphp

{{-- After --}}
@use('App\Enums\WidgetStatusEnum', 'Status')
@use('App\Models\Bar')

{{ Status::Foo }}
{{ Bar::first() }}



Abbreviate a number with the Number::abbreviate() method




@jcsoriano contributed a Number::abbreviate() class to the newly added Number Class, which provides a human-readable abbreviated number:
Number::abbreviate(1_000_000); // "1M"
Number::abbreviate(100_001); // "100K"
Number::abbreviate(100_100); // "100K"
Number::abbreviate(99_999); // "100K"
Number::abbreviate(99_499); // "99K"



Add the --with-secret option to the artisan down command




Jacob Daniel Prunkl contributed a --with-secret option to the artisan down command that will generate a secret phrase that can be used to bypass maintenance mode so the user doesn't have to define one themselves:





Add Conditionable trait to the AssertableJson class




Khalil Laleh contributed adding the Conditionable trait to the AssertableJson class, to make it possible to assert based on a given conditional:
// Before
$response->assertJson(function (AssertableJson $json) use ($condition) {
$json->has('data');

if ($condition) {
$json->has('meta');
}

$json->etc();
});

// After
$response
->assertJson(fn (AssertableJson $json) => $json->has('data'))
->when($condition, fn (AssertableJson $json) => $json->has('meta'))
// ...
;



Release notes




You can see the complete list of new features and updates below and the diff between 10.34.0 and 10.35.0 on GitHub. The following release notes are directly from the changelog:


v10.35.0






* [10.x] Add Conditionable trait to AssertableJson by @khalilst in
https://github.com/laravel/framework/pull/49172 />

* [10.x] Add --with-secret option to Artisan down command. by @jj15asmr in
https://github.com/laravel/framework/pull/49171 />

* [10.x] Add support for Number::summarize by @jcsoriano in
https://github.com/laravel/framework/pull/49197 />

* [10.x] Add Blade @use directive by @simonhamp in
https://github.com/laravel/framework/pull/49179 />

* [10.x] Fixes retrying failed jobs causes PHP memory exhaustion errors when dealing with thousands of failed jobs by @crynobone in
https://github.com/laravel/framework/pull/49186 />

* [10.x] Add "substituteImplicitBindingsUsing" method to router by @calebporzio in
https://github.com/laravel/framework/pull/49200 />

* [10.x] Cookies Having Independent Partitioned State (CHIPS) by @fabricecw in
https://github.com/laravel/framework/pull/48745 />

* [10.x] Update InteractsWithDictionary.php to use base InvalidArgumentException by @Grldk in
https://github.com/laravel/framework/pull/49209 />

* [10.x] Fix docblock for wasRecentlyCreated by @stancl in
https://github.com/laravel/framework/pull/49208 />

* [10.x] Fix loss of attributes after calling child component by @rojtjo in
https://github.com/laravel/framework/pull/49216 />

* [10.x] Fix typo in PHPDoc comment by @caendesilva in
https://github.com/laravel/framework/pull/49234 />

* [10.x] Determine if the given view exists. by @hafezdivandari in
https://github.com/laravel/framework/pull/49231 />






The post Laravel 10.35 Released appeared first on Laravel News.


Join the Laravel Newsletter to get Laravel articles like this directly in your inbox.

Read More

Livewire limitations?

We have been using React for our front-end for some time and are quite comfortable with it. Livewire seems extremely popular, and it would be interesting to try it out, but I’m hesitant about the time it’s going to take to really know if it fits our use-case.

Have you come across limitations when using Livewire with Laravel? If so, what kind? Is it suitable for more than relatively basic interactivity (for example, how would drag n drop be implemented)? submitted by /u/CapnJiggle
[link] [comments]

Read More

CustomGPT expert on Laravel and FilamentPHP

Did anyone feed the latest Laravel docs and preferably docs of FilamentPHP and other highly relevant Laravel packages (Nova, Pest, or even Inertia, Alpine etc) to a custom GPT we could use and prompt? It would sound like a valuable resource.

Or should I just use phind.com or grind the docs myself and build my own CustomGPT (or altnernative using embeddings). I didn’t find much when googling or searching Laravel-news. Lots of articles describe how to integrate OpenAI in your Laravel app, but I need a smart, relevant and up to date AI assistent with knowledge of current docs to speed up development.

Tips appreciated! submitted by /u/mhphilip
[link] [comments]

Read More

Find a value from an array column in a dictionary Pyspark

I have this dataframe in Pyspark:
data = [("definitely somewhere",), ("Las Vegas",), ("其他",), (None,), ("",), ("Pucela Madrid Langreo, España",), ("Trenches, With Egbon Adugbo",)]
df = spark.createDataFrame(data, ["address"])
city_country = {
'las vegas': 'US',
'lagos': 'NG',
'España': 'ES'
}
cities_name_to_code = spark.sparkContext.broadcast(city_country )
df_with_codes = df.withColumn('cities_array', F.lower(F.col('address'))) \
.withColumn('cities_array', F.split(F.col('cities_array'), ', '))



I want to find in cities_array all the keys from cities_name_to_code for each element (get an array of values).
The problem is that I don't want to use UDF.

Read More

Manipulate values in element in xml file using xslt

I want to have possibility to remove or replace unnecessary text inside values in elements in xml file and I want use an XSLT transformation to do that.


In this example file i want to remove specific tags like br, prefix, suffix, bulletlist or replace them into specific text or simple character inside value of Value elements.


There will be many Product elements. And I don't want change structure of this file, so this should be like copy, but with with logic to remove specific texts.


I tried to use templates and copy, but somehow I cannot connect them together.


If any of you could help me with or give me hints that I should follow, I would appreciate.



xyz


test

Read More

Kivy language cannot reference id with python code

I read a Kivy document to reference a widget like self.ids.widget_id.text = "".


In my code, I used the same code I read to change the label widget to data, which is received from the database. I see data from MySql like "MARVEL’S SPIDER-MAN 2," but the program is showing an error.


productlistview.py
from kivy.app import App
from kivy.uix.screenmanager import Screen
from globalstate import GlobalState
from kivy.lang import Builder
from kivy.uix.recycleview import RecycleView
from kivy.uix.gridlayout import GridLayout
import connect_db

Builder.load_file('productlistview.kv')

class ProductListViewMain(Screen):

def on_enter(self, *args):
GlobalState.is_user_authenticated = True
# Check user authentication status
if not GlobalState.is_user_authenticated:
# If not authenticated, go to the login screen
self.manager.current = 'home'
return

class SearchProduct(GridLayout):
pass

class ProductList(GridLayout):
def __init__(self, **kwargs):
super(ProductList, self).__init__(**kwargs)

self.load_products()

def load_products(self):
# Fetch data from MySQL
mydb = connect_db.db
cursor = mydb.cursor()
sql = "SELECT * FROM Product"
cursor.execute(sql)

fetch = cursor.fetchone()

# Close the connection
mydb.close()

if fetch:
print(fetch[1]) # MARVEL’S SPIDER-MAN 2
self.ids.product_name.text = str(fetch[1]) # Error

class ProductListViewApp(App):
def build(self):
self.root = ProductListViewMain()
return self.root

if __name__ == '__main__':
ProductListViewApp().run()



productlistview.kv
:
SearchProduct:
ProductList:

:
cols: 1
canvas:
Color:
rgba: 0.898039, 0.898039, 0.909804, 1
Rectangle:
pos: self.pos
size: self.size

RelativeLayout:

TextInput:
hint_text: 'Search'
font_size: 45
font_family: 'Roboto'
background_color: 0.952941, 0.952941, 0.952941, 1
foreground_color: 0.482353, 0.552941, 0.576471, 1
size_hint_y: None
height: 70
size_hint_x: None
width: 850
pos_hint: {'center_x':0.5, 'center_y':0.85}

:
cols: 5
row_force_default: True
row_default_height: 350
col_force_default: True
col_default_width: 250

BoxLayout:
Image:
id: product_image
allow_stretch: True
size_hint_y: None
size_hint_x: None
height: 250
width: 250
pos_hint: {'center_x': .5, 'center_y': .5}

BoxLayout:
Label:
id: product_name
font_family: 'Roboto'
font_size: 30
color: 0.482353, 0.552941, 0.576471, 1
size_hint: (0.146341, 0.0956522)
pos_hint: {'center_x': .5, 'center_y': .5}

BoxLayout:
Label:
id: product_description
text: 'Description'
font_family: 'Roboto'
font_size: 30
color: 0.482353, 0.552941, 0.576471, 1
size_hint: (0.146341, 0.0956522)
pos_hint: {'center_x': .5, 'center_y': .5}

BoxLayout:
Label:
id: product_price
text: 'Price'
font_family: 'Roboto'
font_size: 30
color: 0.482353, 0.552941, 0.576471, 1
size_hint: (0.146341, 0.0956522)
pos_hint: {'center_x': .5, 'center_y': .5}

BoxLayout:
Button:
id: add_cart
text: 'add to cart'
size_hint: (0.243902, 0.182609)
foreground_color: 0.482353, 0.552941, 0.576471, 1
background_color: 0.811765, 0.847059, 0.862745, 1
font_size: 30
pos_hint: {'center_x': .5, 'center_y': .5}
on_press: root.test()



Error
[INFO ] [Text ] Provider: sdl2
[INFO ] [GL ] NPOT texture support is available
MARVEL’S SPIDER-MAN 2
Traceback (most recent call last):
File "kivy/properties.pyx", line 961, in kivy.properties.ObservableDict.__getattr__
KeyError: 'product_name'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "/Users/fluke/Desktop/SEP410/Apps/productlistview.py", line 55, in
ProductListViewApp().run()
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/app.py", line 955, in run
self._run_prepare()
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/app.py", line 925, in _run_prepare
root = self.build()
^^^^^^^^^^^^
File "/Users/fluke/Desktop/SEP410/Apps/productlistview.py", line 51, in build
self.root = ProductListViewMain()
^^^^^^^^^^^^^^^^^^^^^
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/uix/relativelayout.py", line 274, in __init__
super(RelativeLayout, self).__init__(**kw)
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/uix/floatlayout.py", line 65, in __init__
super(FloatLayout, self).__init__(**kwargs)
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/uix/layout.py", line 76, in __init__
super(Layout, self).__init__(**kwargs)
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/uix/widget.py", line 366, in __init__
self.apply_class_lang_rules(
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/uix/widget.py", line 470, in apply_class_lang_rules
Builder.apply(
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/lang/builder.py", line 540, in apply
self._apply_rule(
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/lang/builder.py", line 662, in _apply_rule
self._apply_rule(
File "/Users/fluke/Desktop/SEP410/Apps/.venv/lib/python3.11/site-packages/kivy/lang/builder.py", line 658, in _apply_rule
child = cls(__no_builder=True)
^^^^^^^^^^^^^^^^^^^^^^
File "/Users/fluke/Desktop/SEP410/Apps/productlistview.py", line 29, in __init__
self.load_products()
File "/Users/fluke/Desktop/SEP410/Apps/productlistview.py", line 45, in load_products
self.ids.product_name.text = str(fetch[1])
^^^^^^^^^^^^^^^^^^^^^
File "kivy/properties.pyx", line 964, in kivy.properties.ObservableDict.__getattr__
AttributeError: 'super' object has no attribute '__getattr__'. Did you mean: '__setattr__'?

Read More

Changing prefix build for static asset in Nextjs

I just wonder if we can configure name of prefix asset in nextjs 13


when we running build of next application it will produce new folder into project with name "out" folder and there will be several folder inside there.


When we using from next/image it will build into /_next/static/media/myimage.svg


Is it possible to us, maybe in config.next.json to change all image path to something else like /_next/static/asset/myimage.svg or /_next/images/myimage.svg


I just wonder if we can change build prefix in nextjs


Thank you

Read More